- By champions for champions -
MIDNIGHT
EVENING
DAWNDiva
CCC
Striving for glory in the most prestigious cross-country competitions? The DIVA will take you to goal.
Size
m²
| XS | S | M | L |
| 21 | 23 | 25 | 26 |
Specs
| XS | S | M | L | |
|---|---|---|---|---|
| Linear scaling factor | 1 | 1.04 | 1.08 | 1.12 |
| Projected area (m²) | 17.4 | 18.9 | 20.3 | 21.9 |
| Flat area (m²) | 21 | 22.7 | 24.5 | 26.3 |
| Glider weight (kg) | 5 | 5.4 | 5.8 | 6.2 |
| Total line length (m) | 205 | 212 | 222 | 231 |
| Height (m) | 7.1 | 7.4 | 7.6 | 7.9 |
| Number of main lines (A/B/C) | 3/3 | |||
| Cells | 74 | |||
| Flat aspect ratio | 7.5 | |||
| Projected aspect ratio | 5.4 | |||
| Root chord (m) | 2 | 2.1 | 2.3 | 2.5 |
| Flat span (m) | 12.6 | 13 | 14.1 | 15.8 |
| Projected span (m) | 9.7 | 10.1 | 10.9 | 12.2 |
| Trim speed (km/h) | 40 | |||
| Top speed (km/h) | 75 | 75 | 74 | 74 |
| Min sink (m/s) | 1 | |||
| Best glide | 12 | |||
| Certified weight range (kg) | 70-90 | 80-100 | 90-112 | 100-125 |
| Certification (EN/LTF) | CCC | |||
Info
With 25 years of competition experience behind him, Bruce understands well the requirements of a good competition wing. The DIVA is the fastest and most advanced paraglider he has ever created. CCC certified, it is constructed from a mix of standard D30 and lightweight 27g Porcher cloths. It benefits from a new minimal-drag line layout, CCB, shark nose, progressive stability and a speed-optimising profile. All that makes the DIVA very competitive yet easy to handle in the air and on the ground, with top safety for its class.
Tech
BGD Feedback
Gliders that talk are safer. Safer gliders make pilots perform better. Better performing pilots fly further. Further flying pilots are happier pilots. BGD Feedback produces happier pilots!
Leading edge mini-ribs
Situated along the leading edge are reinforced mini-ribs, designed to help produce a rock-solid profile while on speed bar.
Maximised unsupported cells
Optimised unsupported cell groups are designed to match the span-wise load distribution influenced by the line layout. Coupled with a strong internal structure, the line layouts that create more span-wise tension can support more unsupported cells. While maintaining a homogenous wing, this helps to minimise line consumption reducing drag thus improving performance.
Integrated Line Layout
The line layout of our gliders is fully integrated into the wing design. Sail and lines are designed together, holistically. The cell widths and the internal straps that transfer the load though the sail are all designed according to the line layout. Even the panel shaping is matched with the line layout through detailed CAD simulation. The result is simple: fewer lines and stronger, faster, safer gliders.
Post C-band
We have added a Post-C band running along the top surface which seamlessly moves down to the bottom surface at the tip, connecting directly to the last line cascade. Instead of putting heavy plastic rods above the C lines we use this band to counter the common flip-up ripple caused when applying a little brake. The problem with paragliders is when a little brake is applied the cupping of the trailing edge creates lift which often buckles the profile near the Cs. We have solved this problem with the Post-C Band, an eloquent, lightweight, clean and volume reducing solution.
Progressive Stability
Using our Parasim simulation program, BGD gliders are designed to have a stable and solid centre with progressively softer tips. This teaches pilots to predict and avoid deflations and stay aware of the air.
Snap Locks
BGD developed the first snaplocks for paragliding with Fidlock a decade ago. They have been refined and improved over the years and have now been widely adopted in the industry. A small focused magnet inside the catch with an internal locking system holds the handles in place. They release only when the handles are pulled down towards the pilot, so they don’t fall off while kiting, packing, or performing manoeuvres.
Strong shark nose
An ultra aggressive shark nose optimises stability at all speeds. Not all sharks are created equal and BGD’s shark noses are very aggressive, maximising the effects of the technology.
Triple finger diagonals
Triple Finger Diagonals create a more solid and durable wing. Across the whole chord of the profile, three-piece diagonal supports pass through holes in the ribs. They ensure structural integrity by avoiding the cloth being loaded in the bias direction. This is particularly important near the trailing edge where the profile is thin and shallower diagonal ribs supporting high loads.
Weight-optimised ribs
We have maintained the strength and rigidity of the ribs while removing unnecessary material. This means less weight for no increase in cost or reduction in strength of the wing. The hole positioning and size depends on the loads taken locally by the sail, and it is thanks to recent developments in our software that it is now possible to accurately calculate this.